MR-16OUT series 3 change-log file 

Firmware consists of 3 parts:
* APP code     	mr16out_3_2x_x_enc.aax
* LOADER code   loader_mr16out_3_2x_x_enc.aax
* BOOT code     boot_mr16_out_3_x_x_enc.aax
2023-11-07
 	app    3.22.8
 	-update FreeRTOS to v10.4.3-Patch3
 	-fix MbedTLS CVE-2021-43666
 	-update cryptoauthlib to v3.5.1
 	loader 3.22.8
 	-fix MbedTLS CVE-2021-43666
 	-update cryptoauthlib to v3.5.1
 	boot 3.22.8
2023-08-25
 	app    3.22.7
 	loader 3.22.7
 	boot 3.22.7
2023-02-15
 	app    3.22.6
 	loader 3.22.6
 	boot 3.22.6
2022-10-03
 	app    3.22.5
 	loader 3.22.5
 	boot 3.22.5
2022-08-04
 	app    3.22.4
      -update FreeRTOS to v10.4.3-Patch2
      -update MbedTLS to v2.28.0
      -add support for alternate crypto eeprom 
 	loader 3.22.4
      -update MbedTLS to v2.28.0
      -add support for alternate crypto eeprom
 	boot 3.22.4
2022-04-21
 	app    3.22.3
 	loader 3.22.3
 	boot 3.22.3
2022-03-24
 	app    3.22.2
 	loader 3.22.2
 	boot 3.22.2
2022-03-16
 	app    3.22.1
 	loader 3.22.1
 	boot 3.22.1
2020-07-01
 	app    3.21.13
 	loader 3.21.13
 	boot 3.1.1
2020-06-23
 	app    3.21.12
      -fix: do not send back ack for periodic time broadcast from controller to address issue with SIO dropping offline 
 	loader 3.21.12
      -fix: do not send back ack for periodic time broadcast from controller to address issue with SIO dropping offline 
 	boot 3.1.1
2020-05-11
 	app    3.21.11
	 -fix: mbedTLS disable weak ciphers and hash algorithms
 	loader 3.21.11
	 -fix: mbedTLS disable weak ciphers and hash algorithms
 	boot 3.1.1
2020-02-07
 	app    3.21.10
 	loader 3.21.10
 	boot 3.1.1
2019-11-26
 	app    3.21.9
	 - fix crashing when changing the ictv_num for inputs
 	loader 3.21.9
 	boot 3.1.1
2019-10-23
 	app    3.21.8
 	- fix  the bug when extended length reply message  to re-transmitted  command ( this happens  when comm error occurs)  have incorrect length . 
 	loader 3.21.8
	- increase heap size 
 	boot 3.1.1
2019-06-27
 	app    3.21.7
 	loader 3.21.7
 	boot 3.1.1
2019-06-03
 	app    3.21.6
 	loader 3.21.6
 	boot 3.1.1
2019-05-01
 	app    3.21.5
 	loader 3.21.5
 	boot 3.1.1
2019-03-19
 	app    3.21.4
	-replace WolfSSL with mbedTLS
	-add reset command for crypto memory chip
 	loader 3.21.4
	-replace WolfSSL with mbedTLS
 	boot 3.1.1
2019-02-08
 	app    3.21.3
 	loader 3.21.3
 	boot 3.1.1
2019-01-17
 	app    3.21.2
 	loader 3.21.2
 	boot 3.1.1
2018-11-16
 	app    3.21.1
 	loader 3.21.1
	boot 3.1.1 
2018-08-27
 	app    3.21.0
 	-fix error when downloading firmware when Master Key AES is enabled
 	loader 3.21.0
	-fix error when downloading firmware when Master Key AES is enabled
	boot 3.1.1
2018-07-25
 	app    3.20.15
	-fix issue when certificate may become invalid after it programmed during production 
	-fix IAU Cannot download Firmware to any Series 3 SIOs
 	loader 3.20.15
	-fix IAU Cannot load Firmware to any Series 3 SIOs
	boot 3.1.1
2018-06-07
 	app    3.20.14
	-upgrade  WolfSSL library to v. 3.14.0
	-add enable RSA blinding, recommended when using RSA encryption to avoid side-channel attack vulnerability
	-add support for extended reader led colors
 	loader 3.20.14
	-upgrade  WolfSSL library to v. 3.14.0
	-add enable RSA blinding, recommended when using RSA encryption to avoid side-channel attack vulnerability
	boot 3.1.1

2018-01-30
 	app    3.20.13
	-fix  firmware download fault condition handling ( controller connection loss)	  
 	loader 3.20.13
	-fix  firmware download fault condition handling ( controller connection loss)	  
	boot   3.1.1
	-add flash addresses validations before verifying firmware crc

2018-01-24
 	app    3.20.12
 	loader 3.20.12
	boot 3.1.0
2018-01-19
 	app    3.20.11
 	loader 3.20.11
	-fix timeouts during firmware download
	boot 3.1.0
	
2018-01-15
 	-changes in common code areas.
	app    3.20.10
 	loader 3.20.10
	boot 3.1.0


2018-01-08
 	app    3.20.9
 	loader 3.20.9
	-add:  boot fw upgrade support
	boot 3.1.0
	-add: boot fw upgrade support 

2017-12-14
 	app    3.20.8
 	loader 3.20.8
2017-12-12
	-add: code for MR62e board in common code areas.
 	app    3.20.7
	 -fix: relay activation count 24h problem 
 	loader 3.20.7
2017-10-19
	-add: code for MR62e board in common code areas.
	-fix dropping offline at 111520 baud rate
 	app    3.20.6
 	loader 3.20.6 
2017-06-15
	app    3.20.5
 	loader 3.20.5
	-add: added code for SR10A board in common code areas.
2017-06-13
 	app    3.20.4
	-fix Power Tamper and Cabinet tamper alarms are not reported when SIO comes online
	-fix fix potential vulnerability in Crypto Memory protocol implementation
	loader 3.20.4
	- fix can't download firmware if it is connected to EP15XX boards that has SIO encryption enabled
2017-05-23
 	app    3.20.3
 	loader 3.20.3
	 -fix: inputs not working when board doesn't have reader ports
2017-05-23
 	app    3.20.2
 	loader 3.20.2
	 -add : clean up and re-factoring 
2017-05-16
 	app    3.20.1
 	loader 3.20.1
	 - fix : Relay stays active when using Trigger & Procedure
	 - fix : issues found by static code analyzer
	 


2017/4/11
	app 3.20.0
  	loader 3.20.0
	- initial release