========================= 2025/04/17 MP Series 2.5.0.164 ============================= **New features and enhancements:** - Updated OSDP Vendor code list to reflect latest published names within the OSDP file transfer page. (CPD-1432) - Enhanced OSDP file transfer commands to better support HID Linq™. (CPD-1628) **Resolved issues:** - Resolved an issue to remove STS headers from an unencrypted HTTP connection. (SD-5093) - Resolved an issue where a panel reboot would not retain extended access level settings such as escort mode, access level activation date, and access level deactivation date when using operating mode 0 and multiple operating modes defined. (SD-5572) - Resolved an issue where a SimonsVoss gateway would not reconnect after losing network connection. (SD-6206) - Resolved an issue to update webpage customization for OEM 16896. (SD-6393) **Known issues:** - Downgrading to a lower revision of firmware can result in a panel entering a degraded mode that would require factory repair. ========================= 2025/03/14 MP Series 2.4.0.653 ============================= **New features and enhancements:** - Added an update to bulk erase logic when using HTS. (CPD-1473) - Enabled support for HID® Signo™ Contact readers. (CPD-1470) - Added OEM settings for OEM code 16896. (CPD-1378) - Updated OEM settings for OEM code 16640. (CPD-1018) - Added support for the TrustZero add-on package. (CPD-1034) - Added support for the pivCLASS® add-on package. (CPD-1033) **Resolved issues:** - Resolved an issue where the 29:X transaction was not included within the PSIA stream. (SD-6060) - Resolved an issue where a 1.3x to 2.3 firmware migration was resulting in an unresponsive panel. (SD-6016) - Resolved an issue where the controller would drop host connection when communication with an ethernet SIO was lost. (SD-5971) - Resolved an issue with OSDP communication to better handle sequence numbers. (SD-5968) - Resolved an issue where a migration would default network settings when a panel's network webpage was never previously saved. (SD-5639) - Resolved an issue where not all 64 readers were properly displayed within the OSDP File Transfer webpage. (SD-5638) - Resolved an issue where the combination of IPv6 only and IP Client were not establishing communication. (SD-1342) ========================= 2024/11/25 MP Series 2.3.0.326 ============================= 2024/11/05 - CPD-1345: Added ability to use structure commands when using HTS 2024/11/05 - CPD-1344: Increased performance when using HTS 2024/11/05 - CPD-1342: Added additional security enhancements 2024/11/05 - CPD-1061/SD-4265: Added ability to have a trigger disregard timezone check 2024/11/05 - CPD-1061: Added ability to allow triggering off the status of the strike activation/deactivation 2024/11/05 - CPD-1140: Added ability to disable Legacy Mode via the controller webpage 2024/11/05 - CPD-1118/SD-4423: Added ability to disable OSDP readers within the 112 command 2024/11/05 - CPD-954: Support for add-on packages 2024/11/05 - SD-5571: Resolved potential MP buffer overflow where the board would lock up and show LED 4 on until a bulk erase is performed ========================= 2024/08/23 MP Series 2.2.0.109 ============================= 2024/08/01 - (SD-5380) Resolved an issue when updating firmware ========================= 2024/08/01 MP Series 2.1.0.1353 ============================= 2024/07/31 - (SD-5379) Fixed an issue where hostname was not being set properly when using MAC-6 format 2024/07/31 - (SD-5377) Resolved an issue where the MR51e was not connecting ========================= 2024/07/23 MP Series 2.1.0.1309 ============================= 2024/07/22 - (SD-5314) Fixed an issue where the 1501 would not keep a SIO online after the internal reader was defined ========================= 2024/07/11 MP Series 2.1.0.1263 ============================= 2024/07/09 - (SD-4626) Fixed an issue where peer certificates could not be uploaded 2024/07/09 - (SD-5277) Fixed an issue where the 1856 command was not naking when certificates did not exist. ========================= 2024/07/04 MP Series 2.1.0.1226 ============================= 2024/07/01 - (SD-5298) Fixed an issue where the controller would crash when no reader was assigned to an ACR ========================= 2024/06/27 MP Series 2.1.0.1195 ============================= 2024/06/25 - (SD-5267) Fixed in SD-5082 ========================= 2024/06/20 MP Series 2.1.0.1139 ============================= 2024/06/18 - (SD-5270) Fixed the 900 command to properly return the AH30 legacy mode settings. ========================= 2024/06/13 MP Series 2.0.3.9 ============================= 2024/06/06 - (SD-4702) Fixed the 3319 command to update area occupancy counts when granting free pass and moving cards to area 0. ========================= 2024/06/05 MP Series 2.0.3.1 ============================= 2024/05/31 - (SD-5209) Fixed an issue where an incorrect PIN event was being reported when the pin data included a * or # sign 2024/05/31 - (SD-5232) Fixed an issue where bulk reader mode changes would fail on Aperio devices. 2024/05/31 - (SD-4444) Disabled OSDP diagnostic logging to the syslog by default ========================= 2024/05/30 MP Series 2.1.0.973 ============================= 2024/05/23 - (SD-5172) Fixed an issue related to the host grant delays with the Gen 5 Aperio Hub. ========================= 2024/05/23 MP Series 2.1.0.921 ============================= 2024/05/20 - (SD-5082) Fixed an issue where the 128 command was resulting in a MP board crashing. ========================= 2024/04/25 MP Series 2.1.0.758 ============================= 2024/04/24 - (SD-5134) OSDP file transfer fix for file transfers via API 2024/04/24 - (SD-4220) Fixed redundant auto-save after forcing auto-save ========================= 2024/04/13 MP Series 2.1.0.651 ============================= 2024/04/12 - (SD-4411) Fixed an issue where the 5th OSDP file transfered failed. ========================= 2024/03/21 MP Series 2.1.0.504 ============================= 2024/03/18 - (SD-4817) - Extended Host Response Command to allow approving/denying access requests with an Large Encoded ID number. 2024/03/15 - (SD-4828) Addressed issue with PSIA Network Interfaces command ========================= 2024/02/17 MP Series 2.1.0.401 ============================= 2024/02/16 - (SD-4953) Minor improvements to web pages 2024/02/12 - (SD-4727) Uploading an invalid web certificate would cause the controller to enter a non-bootable state 2024/02/09 - (SD-4861) UI fix for the host communication web page authorized IP address controls 2024/02/07 - (SD-4810) Improvement with firmware update mechanism ========================= 2024/02/01 MP Series 2.0.1.310 ============================= 2024/01/30 - (SD-4412) Fixed an issue where OSDP file transfer failed via the web page 2024/01/29 - (SD-4738) Authorized IP address not saving within webpage ========================= 2024/01/21 MP Series 2.1.0.216 ============================= 2024/01/19 - (SD-4729) Certificates are not lost after 10 days of inactivity. 2024/01/12 - (SD-4736) Fixed issue where MAC address was lost during migration to Honeywell panels. 2024/01/12 - (SD-4421) Fixed an issue where not all cards were deleted after using the 343 command. 2023/12/22 - (SD-4574) Fixed an issue with the 2252 command and not reading back the full notes field. ========================= 2023/11/10 MP Series 2.0.0.1366 ============================= 2023/11/01 - (SD-4320) Removed temporary diagnostic messages ========================= 2023/10/15 MP Series 2.0.0.1207 ============================= 2023/10/14 - (SD-4415) Update to release build files for MBS ELDK v22.2.3 2023/10/14 - (SD-4414) Update gnupg in the release builds ========================= 2023/10/12 MP Series 2.0.0.1187 ============================= 2023/10/10 - (SD-4197) Update to MBS patch release 22.2.3 2023/10/09 - (SD-4370) Web page security improvements ========================= 2023/10/07 MP Series 2.0.0.1157 ============================= 2023/10/06 - (SD-4319) URL for open source information updated on device info web page 2023/10/05 - (SD-4068) During soft reboot will also restart onboard SIO process 2023/10/03 - (SD-4329) Web page security improvement 2023/10/02 - (SD-4331) Run OpenSSL in FIPS mode 2023/10/02 - (SD-4196) Update of OpenSSL to 3.0.10 ========================= 2023/10/01 MP Series 2.0.0.1104 ============================= 2023/09/27 - (SD-4175) Fix to support $ character in homepage notes 2023/09/27 - (SD-4161) Updated 3rd party library to latest version ========================= 2023/09/23 MP Series 2.0.0.1057 ============================= 2023/09/22 - (SD-4083) V100 - Relay gets deactivated if access is granted when temp mode 7 times out and ACR gets back to mode 2 2023/09/22 - (SD-4128) Properly end web page session when detecting an error 2023/09/22 - (SD-4164) Fix for host configuration lost during migration or reboot 2023/09/20 - (SD-4155) Web page security improvements 2023/09/20 - (SD-4162) Fixed issue with footer bar not utilizing OEM code color scheme 2023/09/20 - (SD-4177) Fixed not rebooting after apply settings confirmation 2023/09/19 - (SD-4170) Longer certification expiration time periods added 2023/09/19 - (SD-4186) Certificate manager web page not refreshing 2023/09/19 - (SD-4010) HID Linq performance improvements ========================= 2023/09/19 MP Series 2.0.0.996 ============================= 2023/09/18 - (SD-4018) LED fixed when reader is in an override state 2023/09/14 - (SD-4038) V100 - Relay associated with slave ACR does not get activated when config file has two 109 commands 2023/09/14 - (SD-4082) Update to modify existing users with the 2250 command 2023/09/01 - (SD-3924) Device Info page does not show IPv6 address ========================= 2023/08/27 MP Series 2.0.0.875 ============================= 2023/08/26 - (SD-3998) Added ability to collect logs during migration package installation 2023/08/26 - (SD-4028) Prevent wrong migration package from being installed on the incorrect board type 2023/08/25 - (SD-4003) Web page security improvements 2023/08/25 - (SD-4017) Updated naming for HID Linq in web pages 2023/08/24 - (SD-3977) Migration package improvements to attempt to perform retries 2023/08/18 - (SD-3928) Fixed an issue of changing ACR mode when ACR is enabled and then disabled using 109 command for V100 2023/08/18 - (SD-4024) Lockdown to Aperio locks can cause lock to revert to unlocked state after a few seconds 2023/08/18 - (SD-4013) Fixed issue with Host Name field ========================= 2023/08/18 MP Series 2.0.0.834 ============================= 2023/08/18 - (SD-4074) fixed authentication of authorized users using HTTP REST API requests 2023/08/17 - (SD-3995) Fixed an issue where V100 with ARC in mode 7 not displaying red LED when invalid PIN is entered 2023/08/17 - (SD-3976) Enforced HSTS on all HTTP communications to ensure that web users only securely connect over HTTPS 2023/08/17 - (SD-4061) Improvements to firmware update packaging 2023/08/11 - (SD-4001) Fix for the reading back of the subnet mask 2023/08/10 - (SD-4021) Aperio AH30 firmware version not reported up properly 2023/08/10 - (SD-3947) Fixed a bug whereby level 1 users couldn't end a prior login session 2023/08/10 - (SD-3994) User Passwords updated to support wider range of characters 2023/08/04 - (SD-4005) Fixed LED issue when V100 has readers are in ACR mode 7 and loses connection 2023/08/04 - (SD-3863) Fixed a spelling error on status page 2023/08/04 - (SD-3969) Web page security improvements 2023/08/04 - (SD-3958) Web page security improvements ========================= 2023/08/03 MP Series 2.0.0.769 ============================= 2023/08/01 - (SD-4019) Certificate Names are consistent with our branding list ========================= 2023/07/31 MP Series 2.0.0.697 ============================= 2023/07/28 - (SD-3927) Fixed an issue of Aperio AH40 not handling card data appropriately when there are multiple credential blocks 2023/07/26 - (SD-3951) Fix issue downloading FW after migrating to 2.0 2023/07/26 - (SD-3810) Security enhancements around login credentials 2023/07/24 - (SD-3781) Credential length updated for MQTT users ========================= 2023/07/20 MP Series 2.0.0.642 ============================= 2023/07/18 - (SD-3790) Web page security improvements 2023/07/13 - (SD-3887) Web page security improvements 2023/07/11 - (SD-3940) Fixed the ability to download syslog 2023/07/10 - (SD-3880) Web page security improvements 2023/07/07 - (SD-3779) HTS: Allow CA certificates to be customized 2023/07/07 - (SD-3780) HTS: Allow downloading firmware via curl ========================= 2023/06/30 MP Series 2.0.0.482 ============================= 2023/06/30 - (SD-3879) Web page security improvements 2023/06/30 - (SD-3791) JQuery update to latest version 2023/06/30 - (SD-3826) Web page security improvements 2023/06/30 - (SD-3882) 913 command no longer erasing configuration 2023/06/30 - (SD-3930) Updated handling of controllers using 1024 bit certificates when migrating to 2.0 firmware 2023/06/30 - (SD-3888) MBS Kernel update to 22.2.2 2023/06/29 - (SD-3881) Optimize boot crypto initialization process 2023/06/28 - (SD-3846) Controller can become unresponsive after several resets 2023/06/28 - (SD-3889) Fix to prevent bulk erase ending in an infinite boot loop 2023/06/28 - (SD-3789) Firmware update integrity improvements 2023/06/28 - (SD-3763) Fix to retrieving syslog from diagnostic web page 2023/06/23 - (SD-3792) Web page security improvements 2023/06/23 - (SD-3901) Modification on reporting model and product ID for AH30 hub in legacy mode 2023/06/23 - (SD-3894) Fix to handle changing downstream port baud rate on the fly