========================= 2024/05/03 LP Series 2.0.2.330 ============================= Added support for the Aperio AH40 protocol version greater than 1.4. (SD-4847) Resolved an issue where the controller would not reconnect to the SimonsVoss hub when using encrypted communications. (SD-4868) Resolved an issue where the configuration on a Schlage lock was being cleared. (SD-4805) Resolved an issue where the LP1501 OSDP reader was not coming back online. (SD-4869) Resolved an issue related to SD-4869 where the LP1501 wasn't configuring the device for SIO communication or the reader port correctly. (SD-5095) Resolved an issue where the Aperio Gen 5 was missing extended info in SIO reporting when multiple hubs are on the same RS-485 bus. (SD-4846) Resolved an issue where the DHCP client identifier was using the DUID. The DHCP client identifier is now the MAC as it was in 1.x firmware. (SD-5035) ========================= 2024/01/31 LP Series 2.0.1.310 ============================= 2024/01/29 - (SD-4738) Authorized IP address not saving within webpage 2024/01/29 - (SD-4727) Uploading an invalid web certificate would cause the controller to enter a non-bootable state 2024/01/29 - (SD-4780) Subnet Mask corrupted during migration 2024/01/19 - (SD-4729) Certificates are not lost after 10 days of inactivity. 2024/01/12 - (SD-4736) Fixed issue where MAC address was lost during migration to Honeywell panels. ========================= 2023/11/10 LP Series 2.0.0.1366 ============================= 2023/11/01 - (SD-4320) Removed temporary diagnostic messages ========================= 2023/10/19 LP Series 2.0.0.1226 ============================= 2023/10/17 - (SD-4363) Fix Error when updating OSDP Files with large filenames ========================= 2023/10/15 LP Series 2.0.0.1207 ============================= 2023/10/14 - (SD-4415) Update to release build files for MBS ELDK v22.2.3 2023/10/14 - (SD-4414) Update gnupg in the release builds ========================= 2023/10/12 LP Series 2.0.0.1187 ============================= 2023/10/10 - (SD-3459) Support for Wiznet PHY 2023/10/10 - (SD-4197) Update to MBS patch release 22.2.3 2023/10/09 - (SD-4368) Updated logo for OEM code 6144 2023/10/09 - (SD-4370) Web page security improvements ========================= 2023/10/07 LP Series 2.0.0.1157 ============================= 2023/10/06 - (SD-4319) URL for open source information updated on device info web page 2023/10/05 - (SD-4068) During soft reboot will also restart onboard SIO process 2023/10/05 - (SD-4354) Updated Mercury OEM code branding 2023/10/03 - (SD-4329) Web page security improvement 2023/10/02 - (SD-4331) Run OpenSSL in FIPS mode 2023/10/02 - (SD-4196) Update of OpenSSL to 3.0.10 2023/10/02 - (SD-3680) Fix to prevent default uboot MAC address from reporting up ========================= 2023/10/01 LP Series 2.0.0.1104 ============================= 2023/09/27 - (SD-4175) Fix to support $ character in homepage notes 2023/09/27 - (SD-4161) Updated 3rd party library to latest version ========================= 2023/09/23 LP Series 2.0.0.1057 ============================= 2023/09/22 - (SD-4083) V100 - Relay gets deactivated if access is granted when temp mode 7 times out and ACR gets back to mode 2 2023/09/22 - (SD-4128) Properly end web page session when detecting an error 2023/09/22 - (SD-4164) Fix for host configuration lost during migration or reboot 2023/09/21 - (SD-3353) Additional Aperio AH40 and AH30 cleanup include fix for escape and return on Mercury powered AH30 hubs 2023/09/20 - (SD-4155) Web page security improvements 2023/09/20 - (SD-4162) Fixed issue with footer bar not utilizing OEM code color scheme 2023/09/20 - (SD-4177) Fixed not rebooting after apply settings confirmation 2023/09/19 - (SD-4170) Longer certification expiration time periods added 2023/09/19 - (SD-4186) Certificate manager web page not refreshing 2023/09/19 - (SD-4010) HID Linq performance improvements ========================= 2023/09/19 LP Series 2.0.0.996 ============================= 2023/09/18 - (SD-4018) LED fixed when reader is in an override state 2023/09/14 - (SD-4038) V100 - Relay associated with slave ACR does not get activated when config file has two 109 commands 2023/09/14 - (SD-4082) Update to modify existing users with the 2250 command 2023/09/01 - (SD-3924) Device Info page does not show IPv6 address ========================= 2023/08/27 LP Series 2.0.0.875 ============================= 2023/08/26 - (SD-2895) Controller using default port instead of custom port for Aperio AH40 after reboot 2023/08/26 - (SD-2595) Web page security improvements 2023/08/26 - (SD-3998) Added ability to collect logs during migration package installation 2023/08/26 - (SD-4142) Web page correction for OEM code 7936 to display registered trademark symbol 2023/08/26 - (SD-4028) Prevent wrong migration package from being installed on the incorrect board type 2023/08/25 - (SD-4003) Web page security improvements 2023/08/25 - (SD-4017) Updated naming for HID Linq in web pages 2023/08/24 - (SD-3721) Fixed an issue with sending 1856 repeatedly 2023/08/24 - (SD-3977) Migration package improvements to attempt to perform retries 2023/08/23 - (SD-4120) MPL alignment with Rev2 HW, including DIP switches and reader ports 2023/08/22 - (SD-1152) Web page security improvements 2023/08/18 - (SD-3494) Updated OEM request to have status page available on web UI 2023/08/18 - (SD-3928) Fixed an issue of changing ACR mode when ACR is enabled and then disabled using 109 command for V100 2023/08/18 - (SD-3719) Fixed an issue of door strike relay not changing state when 308 command is sent simultaneously for V100 2023/08/18 - (SD-1753) Cannot create standard web users when the controller is in legacy mode through the 2250 command 2023/08/18 - (SD-3966) Updated per rebranding request from ACRE 2023/08/18 - (SD-4024) Lockdown to Aperio locks can cause lock to revert to unlocked state after a few seconds 2023/08/18 - (SD-4013) Fixed issue with Host Name field ========================= 2023/08/18 LP Series 2.0.0.834 ============================= 2023/08/18 - (SD-4074) fixed authentication of authorized users using HTTP REST API requests 2023/08/17 - (SD-3995) Fixed an issue where V100 with ARC in mode 7 not displaying red LED when invalid PIN is entered 2023/08/17 - (SD-3976) Enforced HSTS on all HTTP communications to ensure that web users only securely connect over HTTPS 2023/08/17 - (SD-4061) Improvements to firmware update packaging 2023/08/11 - (SD-4001) Fix for the reading back of the subnet mask 2023/08/10 - (SD-4021) Aperio AH30 firmware version not reported up properly 2023/08/10 - (SD-3947) Fixed a bug whereby level 1 users couldn't end a prior login session 2023/08/10 - (SD-3994) User Passwords updated to support wider range of characters 2023/08/05 - (SD-3272) Fixed an issue of status page displaying negative card ID 2023/08/04 - (SD-4005) Fixed LED issue when V100 has readers are in ACR mode 7 and loses connection 2023/08/04 - (SD-3955) Web page security improvements 2023/08/04 - (SD-3863) Fixed a spelling error on status page 2023/08/04 - (SD-3969) Web page security improvements 2023/08/04 - (SD-3958) Web page security improvements 2023/08/04 - (SD-2458) Fixed an issue of not generating transaction messages on invalid PIN when ACR is set to Card & PIN mode ========================= 2023/08/03 LP Series 2.0.0.769 ============================= 2023/08/01 - (SD-3228) Fixed an issue with saving relay count 2023/08/01 - (SD-3609) Web page security improvements 2023/08/01 - (SD-4019) Certificate Names are consistent with our branding list 2023/07/31 - (SD-3508) Fixed an issue of LED displaying yellow on access grants on LP4502 with V100 with iCLASS SE readers ========================= 2023/07/31 LP Series 2.0.0.697 ============================= 2023/07/28 - (SD-3927) Fixed an issue of Aperio AH40 not handling card data appropriately when there are multiple credential blocks 2023/07/27 - (SD-3656) Support AH30 configuration on 900 command 2023/07/26 - (SD-3951) Fix issue downloading FW after migrating to 2.0 2023/07/26 - (SD-3810) Security enhancements around login credentials 2023/07/24 - (SD-3711) Added ability to customize MQTT topics 2023/07/24 - (SD-3781) Credential length updated for MQTT users 2023/07/24 - (SD-3605) Fixed a connection issue with Aperio AH40 Hub with TLS encryption 2023/07/24 - (SD-3673) Firmware update mechanism improvements and security hardening ========================= 2023/07/20 LP Series 2.0.0.642 ============================= 2023/07/19 - (SD-2753) Removed downloading of core dumps from diagnostic web page 2023/07/18 - (SD-3357) Aperio AH40 not reporting up locked jammed 2023/07/18 - (SD-3563) Fix for V100 LED behavior for master/slave ACR configuration 2023/07/18 - (SD-3390) OEM code updates for 13824 2023/07/18 - (SD-3790) Web page security improvements 2023/07/18 - (SD-3519) Resolved an issue where V100 does not support command 308 when only ACR 1 is configured 2023/07/18 - (SD-3751) LP4502 with V100 master/slave configuration generating additional alarm message from ACR slave 2023/07/18 - (SD-3558) Fixed an issue reading Mifare card on iCLASS SE and SE RK40 readers on LP4502 with V100 2023/07/13 - (SD-3887) Web page security improvements 2023/07/11 - (SD-3565) Fixed an issue preventing external SIOs from reconnecting after a reboot in some cases 2023/07/11 - (SD-3708) Improvements with migration package 2023/07/11 - (SD-3940) Fixed the ability to download syslog 2023/07/10 - (SD-3880) Web page security improvements 2023/07/07 - (SD-3779) HTS: Allow CA certificates to be customized 2023/07/07 - (SD-3780) HTS: Allow downloading firmware via curl 2023/07/02 - (SD-2852) Fixed Zeroconf ========================= 2023/06/30 LP Series 2.0.0.482 ============================= 2023/06/30 - (SD-3879) Web page security improvements 2023/06/30 - (SD-3791) JQuery update to latest version 2023/06/30 - (SD-3826) Web page security improvements 2023/06/30 - (SD-3882) 913 command no longer erasing configuration 2023/06/30 - (SD-3930) Updated handling of controllers using 1024 bit certificates when migrating to 2.0 firmware 2023/06/30 - (SD-3888) MBS Kernel update to 22.2.2 2023/06/30 - (SD-3724) Reports crypto chip model in ID Report 2023/06/29 - (SD-3881) Optimize boot crypto initialization process 2023/06/28 - (SD-3846) Controller can become unresponsive after several resets 2023/06/28 - (SD-3889) Fix to prevent bulk erase ending in an infinite boot loop 2023/06/28 - (SD-3789) Firmware update integrity improvements 2023/06/28 - (SD-3763) Fix to retrieving syslog from diagnostic web page 2023/06/28 - (SD-2901) Security improvements regarding certificate usage 2023/06/27 - (SD-3490) Licensing and credits link updated to external URL 2023/06/23 - (SD-2780) Removed the network monitor section from diagnostic web page 2023/06/23 - (SD-3792) Web page security improvements 2023/06/23 - (SD-2790) Fix to not overwrite permanent host communication settings when factory/OEM settings are used 2023/06/23 - (SD-3901) Modification on reporting model and product ID for AH30 hub in legacy mode 2023/06/23 - (SD-3894) Fix to handle changing downstream port baud rate on the fly 2023/06/23 - (SD-3206) Add support for ATSHA204 crypto chip 2023/06/23 - (SD-3696) Preserve network settings on migration to 2.0 2023/06/09 - (SD-3672) OSDP passthrough commands will return results quicker 2023/06/06 - (SD-3690) Set Aperio hub legacy mode per port 2023/05/30 - (SD-3510) Store certificate passwords in a secure keychain 2023/05/30 - (SD-3697) Optimize security during migration process 2023/05/25 - (SD-3321) Start ICD after SWUpdate service 2023/05/23 - (SD-3500) VertX V100 the door alarms cannot be disabled for the V100 2023/05/18 - (SD-3651) Improve intelligent controller reboot times